ROS IndexNo version for distro humble showing noetic. Known supported distros are highlighted in the buttons above.
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found
Plugins
Recent questions tagged phidgets_humidity at Robotics Stack Exchange
No version for distro jazzy showing noetic. Known supported distros are highlighted in the buttons above.
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found
Plugins
Recent questions tagged phidgets_humidity at Robotics Stack Exchange
No version for distro kilted showing noetic. Known supported distros are highlighted in the buttons above.
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found
Plugins
Recent questions tagged phidgets_humidity at Robotics Stack Exchange
No version for distro rolling showing noetic. Known supported distros are highlighted in the buttons above.
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found
Plugins
Recent questions tagged phidgets_humidity at Robotics Stack Exchange
No version for distro github showing noetic. Known supported distros are highlighted in the buttons above.
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found
Plugins
Recent questions tagged phidgets_humidity at Robotics Stack Exchange
No version for distro galactic showing noetic. Known supported distros are highlighted in the buttons above.
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found
Plugins
Recent questions tagged phidgets_humidity at Robotics Stack Exchange
No version for distro iron showing noetic. Known supported distros are highlighted in the buttons above.
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found
Plugins
Recent questions tagged phidgets_humidity at Robotics Stack Exchange
No version for distro melodic showing noetic. Known supported distros are highlighted in the buttons above.
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found
Plugins
Recent questions tagged phidgets_humidity at Robotics Stack Exchange
Package Summary
| Tags | No category tags. |
| Version | 1.0.10 |
| License | BSD |
| Build type | CATKIN |
| Use | RECOMMENDED |
Repository Summary
| Description | ROS drivers for various Phidgets devices |
| Checkout URI | https://github.com/ros-drivers/phidgets_drivers.git |
| VCS Type | git |
| VCS Version | noetic |
| Last Updated | 2025-05-08 |
| Dev Status | MAINTAINED |
| Released | RELEASED |
| Tags | ros ros-driver phidgets |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
Driver for the Phidgets Humidity devices
Additional Links
No additional links.
Maintainers
- Martin Günther
- Chris Lalancette
Authors
- Gary Edwards
Phidgets humidity ROS driver
This is the ROS driver for Phidgets humidity sensor. The various topics, services, and parameters that the node operates with are listed below.
Topics
-
/humidity(std_msgs/Float64) - The current relative humidity in %.
Parameters
-
serial(int) - The serial number of the phidgets humidity to connect to. If -1 (the default), connects to any humidity phidget that can be found. -
hub_port(int) - The phidgets VINT hub port to connect to. Only used if the humidity phidget is connected to a VINT hub. Defaults to 0. -
data_interval_ms(int) - The number of milliseconds between acquisitions of data on the device. Defaults to 500 ms. -
publish_rate(int) - How often the driver will publish data on the ROS topic. If 0 (the default), it will publish every time there is an update from the device (so at thedata_interval_ms). If positive, it will publish the data at that rate regardless of the acquisition interval.
CHANGELOG
Changelog for package phidgets_humidity
1.0.10 (2025-05-08)
1.0.9 (2024-03-13)
- Add support for Phidgets Humidity sensors (#173) I have done a find and replace on the phidgets_temperature package to get the Phidgets Humidity sensor working. Tested with a [HUM1001_0]{.title-ref}.
- Contributors: Gary Edwards
Launch files
- launch/humidity.launch
- Phidgets Humidity launch file
-
Messages
No message files found.
Services
No service files found