No version for distro humble showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

No version for distro jazzy showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

No version for distro kilted showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

No version for distro lyrical showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

No version for distro rolling showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

No version for distro galactic showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

No version for distro iron showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

No version for distro melodic showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange

No version for distro noetic showing github. Known supported distros are highlighted in the buttons above.
Package symbol

conveyor_belt package from conveyor_belt repo

conveyor_belt

ROS Distro
github

Package Summary

Version 1.0.0
License MIT
Build type AMENT_CMAKE
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

Rolo: a Gazebo conveyor belt (URDF + ROS 2 model plugin) you can drop into any simulation; switch it on and off on /conveyor_power.

Maintainers

  • Shantanu Parab

Authors

No additional authors.

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

CHANGELOG
No CHANGELOG found.

Launch files

No launch files found

Messages

No message files found.

Services

No service files found

Plugins

No plugins found.

Recent questions tagged conveyor_belt at Robotics Stack Exchange