No version for distro humble showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
No version for distro jazzy showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
No version for distro kilted showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
No version for distro lyrical showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
No version for distro rolling showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
No version for distro galactic showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
No version for distro iron showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
No version for distro melodic showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set
No version for distro noetic showing github. Known supported distros are highlighted in the buttons above.
Repo symbol

conveyor_belt repository

conveyor_belt

ROS Distro
github

Repository Summary

Description
Checkout URI https://github.com/shantanuparabumd/conveyor_belt.git
VCS Type git
VCS Version main
Last Updated 2026-11-03
Dev Status UNKNOWN
Released UNRELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Packages

Name Version
conveyor_belt 1.0.0

README

Rolo

https://github.com/user-attachments/assets/1ba6580f-544e-4773-be5b-11b73a6e4b06

A conveyor belt for Gazebo you can drop into any simulation: put a part on it, publish true, and it carries the part to the end.

License: MIT

https://github.com/shantanuparabumd/conveyor_belt/assets/112659509/0ed853e3-b937-45b8-adbb-2cfae711ef3d

Rolo was modeled in SolidWorks, exported to URDF, and driven by a small Gazebo Classic model plugin written against ROS 2.

How it works

A real belt is a loop, and a loop is expensive to simulate. Rolo cheats: the belt is a single flat slab on a prismatic joint with a range of just 1 cm.

Step What the plugin does every physics update
Drive Sets belt_joint’s velocity to max_velocity (0.3 m/s by default, from the URDF)
Carry Friction between the slab and anything sitting on it moves the part along
Reset When the slab reaches its 1 cm limit, the plugin snaps it back to 0

The slab only ever moves 1 cm, so it never leaves the frame, but every part on top keeps travelling.

Topic Type Effect
/conveyor_power std_msgs/Bool true runs the belt at max_velocity, false stops it

Run it

Requires ROS 2 Humble and Gazebo Classic 11 (gazebo_ros_pkgs).

mkdir -p ~/ros2_ws/src && cd ~/ros2_ws/src
git clone https://github.com/shantanuparabumd/rolo.git conveyor_belt
cd ~/ros2_ws
rosdep install -i --from-path src --rosdistro humble -y
colcon build --packages-select conveyor_belt && source install/setup.bash

ros2 launch conveyor_belt robot.launch.py                                 # Gazebo + belt
ros2 run conveyor_belt spawn_object.py                                    # drop a box on it  (new terminal)
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: true}"    # start the belt
ros2 topic pub --once /conveyor_power std_msgs/msg/Bool "{data: false}"   # stop it

Use it in your own world

Add the belt to your robot or world URDF and keep the plugin block; change the speed there:

<plugin filename="libconveyor_belt_plugin.so" name="conveyor_belt_plugin">
  <max_velocity>0.3</max_velocity>
</plugin>

Repository layout

├── src/, include/   Gazebo model plugin (libconveyor_belt_plugin.so)
├── urdf/            Belt and box descriptions (xacro)
├── meshes/          STL meshes exported from SolidWorks
├── launch/          Gazebo + spawn launch files
├── scripts/         spawn_object.py: drops a box at the start of the belt
├── worlds/          Empty world
├── cad/             SolidWorks parts and assembly
└── docs/media/      Demo video and screenshot

License

MIT, see LICENSE.

Indexing Errors

  • Could not update repo, using old version: Could not fetch git repository from uri: https://github.com/shantanuparabumd/conveyor_belt.git: remote authentication required but no callback set