No version for distro humble showing melodic. Known supported distros are highlighted in the buttons above.

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

No version for distro jazzy showing melodic. Known supported distros are highlighted in the buttons above.

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

No version for distro kilted showing melodic. Known supported distros are highlighted in the buttons above.

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

No version for distro lyrical showing melodic. Known supported distros are highlighted in the buttons above.

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

No version for distro rolling showing melodic. Known supported distros are highlighted in the buttons above.

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

No version for distro github showing melodic. Known supported distros are highlighted in the buttons above.

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

No version for distro galactic showing melodic. Known supported distros are highlighted in the buttons above.

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

No version for distro iron showing melodic. Known supported distros are highlighted in the buttons above.

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange

Package Summary

Version 3.0.1
License BSD-3-Clause
Build type CATKIN
Use RECOMMENDED

Repository Summary

Description
Checkout URI https://github.com/jsk-ros-pkg/jsk_3rdparty.git
VCS Type git
VCS Version master
Last Updated 2026-11-18
Dev Status DEVELOPED
Released RELEASED
Contributing Help Wanted (-)
Good First Issues (-)
Pull Requests to Review (-)

Package Description

The nfc_ros package

Maintainers

  • Kei Okada
  • Koki Shinjo

Authors

  • Koki Shinjo

nfc_ros

This package is for nfc communication.

Currently only tag reading is supported.

How to use

First build this package

mkdir -p ~/catkin_ws/src
cd ~/catkin_ws
catkin init
cd src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
catkin build nfc_ros

After that, connect NFC device and please activate virtualenv generated from nfc_ros and run nfcpy

source ~/catkin_ws/devel/share/nfc_ros/venv/bin/activate
python -m nfc

This will show a message like this if you do not configure udev for NFC device.

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found usb:054c:06c3 at usb:005:095 but access is denied
-- the device is owned by 'root' but you are 'sktometometo'
-- also members of the 'root' group would be permitted
-- you could use 'sudo' but this is not recommended
-- better assign the device to the 'plugdev' group
   sudo sh -c 'echo SUBSYSTEM==\"usb\", ACTION==\"add\", ATTRS{idVendor}==\"054c\", ATTRS{idProduct}==\"06c3\", GROUP=\"plugdev\" >> /etc/udev/rules.d/nfcdev.rules'
   sudo udevadm control -R # then re-attach device
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs
Sorry, but I couldn't find any contactless device

Please follow instructions until you get message like below

~/ros/ws_jsk_ros_pkg/devel/share/nfc_ros/venv $ python -m nfc
This is the 1.0.4 version of nfcpy run in Python 3.6.9
on Linux-5.4.0-136-generic-x86_64-with-Ubuntu-18.04-bionic
I'm now searching your system for contactless devices
** found SONY RC-S380/P NFC Port-100 v1.11 at usb:005:097
I'm not trying serial devices because you haven't told me
-- add the option '--search-tty' to have me looking
-- but beware that this may break other serial devs

After that, you can now run demo.launch.

source ~/catkin_ws/devel/setup.bash
roslaunch nfc_ros demo.launch

You can get messages from /nfc_ros_node/tag topic when you put NFC tag to NFC reader.

$ rostopic echo /nfc_ros_node/tag
tag_type: 401
ndef_records: []
identifier: "083554be"
---
tag_type: 401
ndef_records: []
identifier: "08aa99aa"
---
tag_type: 401
ndef_records: []
identifier: "08f1b023"
---

ROS2

Build with colcon. nfcpy (nfcpy==1.0.4, as requirements.txt) is installed into a venv made from pyproject.toml/uv.lock at build time, which the node runs in.

mkdir -p ~/ros2_ws/src
cd ~/ros2_ws/src
git clone https://github.com/jsk-ros-pkg/jsk_3rdparty.git
cd ~/ros2_ws
rosdep install --from-paths src --ignore-src -y
colcon build --packages-up-to nfc_ros

Check the NFC device with nfcpy in that venv, as above

```bash

File truncated at 100 lines see the full file

CHANGELOG

Changelog for package nfc_ros

3.0.1 (2026-11-10)

  • Merge pull request #583 from k-okada/rosdistro-55247-review rosdistro#55247 review: rename power_switching_tools_ros to jsk_power_switching_tools, fix licenses
  • use SPDX license identifiers (BSD-3-Clause, Apache-2.0) in package.xml BSD -> BSD-3-Clause and Apache / "Apache License, Version 2.0" -> Apache-2.0 in all packages (ros/rosdistro#55247 review). The LICENSE files of all of them are BSD 3-Clause and Apache 2.0 respectively. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>
  • Contributors: Kei Okada

3.0.0 (2026-11-06)

  • Merge branch 'master' into fix_hoya

  • Merge branch 'master' into voicevox-ros1-ros2

  • Merge pull request #575 from k-okada/ros2-support Add ROS2 (jazzy) support to chaplus_ros, emotion_analyzer, gdrive_ros, google_chat_ros, influxdb_store, power_switching_tools_ros, respeaker_ros, rospatlite, sesame_ros, switchbot_ros

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • [GA] add ROS2 (jazzy) CI and AMENT_IGNORE packages not yet ported to ROS2

    - ros2.yaml: industrial_ci on jazzy. The ROS2 ports depend on jsk_ros1_ros2_compat >= 3.0.2 (jsk_common), installed by rosdep from its jazzy release.

    • AMENT_IGNORE the packages not ported to ROS2 yet.

    - config.yml: AMENT_IGNORE is treated as CATKIN_IGNORE by rosdep's package discovery, so remove them before rosdep install in the ROS1 jobs (same as jsk_common). Also set ROS_VERSION=1 for indigo, which predates ros_environment. Co-Authored-By: Claude Opus 5.5 <<noreply@anthropic.com>>

  • Contributors: Kei Okada

2.1.31 (2025-05-13)

2.1.30 (2025-05-10)

2.1.29 (2025-01-05)

  • [nfc_ros] nfcpy requries python3.6+, skip kinetic which has python3.5 #515)
  • Contributors: Kei Okada

2.1.28 (2023-07-24)

2.1.27 (2023-06-24)

  • fix package.xml/CMakeLists.txt to supress catkin_lint errors (#479)
  • Contributors: Kei Okada

2.1.26 (2023-06-14)

  • add LICENSE files (#476)
  • Contributors: Kei Okada

2.1.25 (2023-06-08)

  • add test to check if ros node is loadable (#463)
  • Add nfc_ros (#406)
  • Contributors: Aoi Nakane, Kei Okada, Koki Shinjo, Naoto Tsukamoto, Shingo Kitagawa

2.1.24 (2021-07-26)

2.1.23 (2021-07-21)

2.1.22 (2021-06-10)

2.1.21 (2020-08-19)

File truncated at 100 lines see the full file

Messages

Services

No service files found

Plugins

No plugins found.

Recent questions tagged nfc_ros at Robotics Stack Exchange