ROS Index
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro jazzy showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro kilted showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro lyrical showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro rolling showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro github showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro galactic showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro iron showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro melodic showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.
Recent questions tagged kangaroo_description at Robotics Stack Exchange
No version for distro noetic showing humble. Known supported distros are highlighted in the buttons above.
|
|
kangaroo_description package from kangaroo_robot repokangaroo_bringup kangaroo_controller_configuration kangaroo_description kangaroo_robot |
ROS Distro
|
Package Summary
| Version | 2.16.1 |
| License | Apache License 2.0 |
| Build type | AMENT_CMAKE |
| Use | RECOMMENDED |
Repository Summary
| Description | |
| Checkout URI | https://github.com/pal-robotics/kangaroo_robot.git |
| VCS Type | git |
| VCS Version | humble-devel |
| Last Updated | 2026-10-05 |
| Dev Status | DEVELOPED |
| Released | RELEASED |
| Contributing |
Help Wanted (-)
Good First Issues (-) Pull Requests to Review (-) |
Package Description
The kangaroo_description package
Maintainers
- Sergi de las Muelas
Authors
No additional authors.
README
No README found.
No README in repository either.
CHANGELOG
Changelog for package kangaroo_description
2.16.1 (2026-10-05)
- Add sensor noise types to the ros2_control tags See merge request robots/kangaroo_robot!180
- Add default noise values
- Add sensor noise types to the ros2_control tags
- Contributors: Sai Kishor Kothakota
2.16.0 (2026-09-19)
- Add simulation parameter to leg transmissions See merge request robots/kangaroo_robot!170
- Properly set index number for ankle and hip xy transmissions See merge request robots/kangaroo_robot!173
- properly map actuator indexes in the transmission for hip xy and ankle xy
- move scene tags inside raw input so that it is kept when saving the mjcf
- point to full models pids if full model
- added full model sim option that emits the transmissions
- Add simulation parameter to leg transmissions
- Contributors: Daniel Costanzi, Sai Kishor Kothakota, danielcostanzi
2.15.1 (2026-08-21)
2.15.0 (2026-08-06)
- Proper launch of the rh8d driver See merge request robots/kangaroo_robot!171
- Adding path to launch rh8d controller It will load different rh8d ros2 control config depending if it's sim or not.
- Removing passing use_mimic to the rh8d use_mimic now only controls the leg chain and it's passed down properly the launch files
- Contributors: Sai Kishor Kothakota, Óscar Martínez
2.14.1 (2026-08-06)
2.14.0 (2026-07-30)
- Fix leg_1_link mesh See merge request robots/kangaroo_robot!168
- Fix leg_1_link mesh
- Contributors: Aina Irisarri, Isaac Acevedo
2.13.2 (2026-07-06)
2.13.1 (2026-07-06)
- Add force to the idle_mode_on_stop_interfaces See merge request robots/kangaroo_robot!165
- Add force to the idle_mode_on_stop_interfaces
- Contributors: Sai Kishor Kothakota
2.13.0 (2026-07-05)
2.12.1 (2026-07-05)
- Modify the limits of the leg length See merge request robots/kangaroo_robot!163
- Modify the limits of the leg length
- Contributors: Sai Kishor Kothakota
2.12.0 (2026-07-04)
- Adding pid gains for force and impedance-current + force interface added See merge request robots/kangaroo_robot!160
- Minor fix
- Adding pid gains for force and impedance-current + force interface added
- Contributors: Sai Kishor Kothakota, antoniomartinez
2.11.2 (2026-07-03)
- Change the foot sole to a simpler and ligher one See merge request robots/kangaroo_robot!161
- Change the foot sole to a simpler and ligher one
- Contributors: Sai Kishor Kothakota
2.11.1 (2026-07-03)
- Ankle bar frames were swapped, now they are correct See merge request robots/kangaroo_robot!159
- ankle bar frames were swapped, now they are correct
- Contributors: Daniel Costanzi, Sai Kishor Kothakota
2.11.0 (2026-07-03)
- Suppress overrun warnings for the microstrain IMU See merge request robots/kangaroo_robot!158
- Suppress overrun warnings for the microstrain IMU
- Add force torque sensor related changes See merge request robots/kangaroo_robot!157
- Add missing mujoco tags for force and torque
- Contributors: Sai Kishor Kothakota
2.10.0 (2026-07-01)
- Rename sole frame for detachable feet type so it has the same name as the fixed version See merge request robots/kangaroo_robot!156
File truncated at 100 lines see the full file
Package Dependencies
| Deps | Name |
|---|---|
| rclcpp | |
| rcl_interfaces | |
| pal_module_cmake | |
| ament_cmake_auto | |
| xacro | |
| launch_ros | |
| launch | |
| launch_pal | |
| launch_param_builder | |
| kangaroo_controller_configuration | |
| kangaroo_transmissions | |
| pal_urdf_utils | |
| pal_sea_arm_description | |
| ament_lint_auto | |
| ament_lint_common | |
| ament_cmake_pytest | |
| launch_testing_ament_cmake | |
| urdf_test |
System Dependencies
No direct system dependencies.
Dependant Packages
Launch files
No launch files found
Messages
No message files found.
Services
No service files found
Plugins
No plugins found.