• launch/map_saver.launch
  • • map_name [default: map]
    • map_topic [default: map]
    • destination_folder [default: $(optenv HOME /home/summit)]
• launch/robot_localization_world.launch
  • • id_robot [default: $(optenv ROBOT_ID robot)]
    • prefix [default: $(arg id_robot)_]
    • global_frame [default: world_frame]
• launch/navsat_transform_node.launch
  • This comes from the navsat_transform_template.launch. Explains what this node does. This node needs to know the values of three variables in order to function: (1) A world-referenced heading (yaw). The node assumes an ENU standard for heading, with 0 facing east, though it can support any heading. (2) Odometry data that gives the robot's current pose in its own local coordinate frame (typically map or odom) (3) A latitude/longitude/altitude. These three items allow us to compute a transform from the global frame to your robot's local frame. There are several means of providing them, though keep in mind that these modes are typically mutually exclusive. (1) World-referenced yaw can be provided by: (a) an IMU in a sensor_msgs/Imu message (topic is /imu/data/) (b) the heading in the nav_msgs/Odometry message in (2) below can be used. To enable this behavior, set the use_odometry_yaw parameter to true, and set the delay parameter to some small value (~3 seconds). Be careful, though: this heading must still be globally referenced, so if your state estimation node always starts with a 0 heading, you CAN NOT use this option. (c) the "datum" service. See below. (2) The odometry data, which needs to have a valid frame_id, can be provided by: (a) a nav_msgs/Odometry message from your robot_localization state estimation node. (b) the "datum" service (all odometry variables are assumed to be 0 in this case). See below. (3) The latitude, longitude, and altitude can be provided by: (a) a sensor_msgs/NavSatFix message (b) the "datum" service (4) Alternatively, at any time, the user can send a robot_localization/SetDatum service message to the "datum" service. This will manually set the latitude, longitude, altitude, and world-referenced heading, and will assume an odometry message containing all zeros. This will effectively set the origin at the specified lat-long, with the X-axis aligned with east. The user can set this datum via the "datum" service, or via the launch file. If the wait_for_datum parameter is set to true, then the node will attempt to use the datum parameter. If the parameter is not set, it will wait until it receives a service call. The output of this node is an odometry message that contains the GPS data transformed into the robot's world coordinate frame (i.e., the frame specified by input (2)'s frame_id), or the coordinate frame defined by the message sent to the "datum" service.
  • • wait_for_datum [default: false]
• launch/amcl.launch
  • • config_package [default: $(optenv ROBOT_LOCALIZATION_CONFIG_PACKAGE summit_xl_localization)]
    • config_folder [default: config]
    • config_path [default: $(eval find(config_package) + '/' + config_folder)]
    • id_robot [default: $(optenv ROBOT_ID robot)]
    • prefix [default: $(arg id_robot)_]
    • x_init_pose [default: 0]
    • y_init_pose [default: 0]
    • z_init_pose [default: 0]
    • scan_topic [default: $(optenv ROBOT_LOCALIZATION_SCAN_TOPIC front_laser/scan)]
    • map_topic [default: map]
    • global_frame [default: $(arg prefix)map]
    • odom_frame [default: $(arg prefix)odom]
    • base_frame [default: $(arg prefix)base_footprint]
    • odom_model_type [default: $(optenv ROBOT_LOCALIZATION_ODOM_MODEL diff)]
• launch/robot_localization_odom.launch
  • • id_robot [default: $(optenv ROBOT_ID robot)]
    • prefix [default: $(arg id_robot)_]
    • odom_frame [default: $(arg prefix)odom]
    • base_frame [default: $(arg prefix)base_footprint]
    • odom_topic [default: robotnik_base_control/odom]
    • imu_topic [default: imu/data]
• launch/map_server.launch
  • • config_package [default: $(optenv ROBOT_LOCALIZATION_CONFIG_PACKAGE summit_xl_localization)]
    • maps_folder [default: maps]
    • maps_path [default: $(eval find(config_package) + '/' + maps_folder)]
    • map_file [default: map1/map1.yaml]
    • id_robot [default: $(optenv ROBOT_ID robot)]
    • prefix [default: $(arg id_robot)_]
    • frame_id [default: $(arg prefix)map]
    • map_topic [default: map]
• launch/localization_complete.launch
  • • config_package [default: $(optenv ROBOT_LOCALIZATION_CONFIG_PACKAGE summit_xl_localization)]
    • config_folder [default: config]
    • maps_folder [default: maps]
    • config_path [default: $(eval find(config_package) + '/' + config_folder)]
    • maps_path [default: $(eval find(config_package) + '/' + maps_folder)]
    • id_robot [default: summit_xl]
    • prefix [default: $(arg id_robot)_]
    • map_topic [default: map]
    • map_file [default: map1/map1.yaml]
    • frame_id [default: $(arg prefix)map]
    • x_init_pose [default: 0]
    • y_init_pose [default: 0]
    • z_init_pose [default: 0]
    • scan_topic [default: $(optenv ROBOT_LOCALIZATION_SCAN_TOPIC front_laser/scan)]
    • global_frame [default: $(arg prefix)map]
    • odom_frame [default: $(arg prefix)odom]
    • base_frame [default: $(arg prefix)base_footprint]
    • odom_model_type [default: $(optenv ROBOT_LOCALIZATION_ODOM_MODEL diff)]
• launch/slam_gmapping.launch
  • • config_package [default: $(optenv ROBOT_LOCALIZATION_CONFIG_PACKAGE summit_xl_localization)]
    • config_folder [default: config]
    • config_path [default: $(eval find(config_package) + '/' + config_folder)]
    • id_robot [default: $(optenv ROBOT_ID robot)]
    • prefix [default: $(arg id_robot)_]
    • scan_topic [default: $(optenv ROBOT_LOCALIZATION_SCAN_TOPIC front_laser/scan)]
    • map_frame [default: $(arg prefix)map]
    • odom_frame [default: $(arg prefix)odom]
    • base_frame [default: $(arg prefix)base_link]
• launch/rl_utils.launch
• launch/robot_localization_complete.launch
  • • debug [default: false]
    • gui [default: true]
    • wait_for_datum [default: false]
    • id_robot [default: $(optenv ROBOT_ID robot)]
    • prefix [default: $(arg id_robot)_]

No questions yet, you can ask one here.